Table of Contents
Advertisement
Reinstalling the Disk Drive Modules and Dummy Disk Drive Modules
Attention:
v Disk drive modules are fragile. Handle them with care, and keep them well away
from strong magnetic fields.
v Any slot that has no disk drive module installed must contain a dummy disk drive
module. The dummy disk drive module ensures that the correct airflow is maintained
around the disk drive modules in the other slots.
1. Referring to the note that you made about the original locations of the modules,
reinstall the modules (in the same sequence that they were removed) as described
in the following steps.
2. Refer to Figure 10.
Figure 10. Reinstalling a Disk Drive Module
3. Ensure that the handle 1 is fully open on the disk drive module that you are
going to install.
4. With one hand giving support to the base of the module and the other hand
holding the handle 1 , insert the module and push it into the slot.
When the handle touches the front surface of the enclosure, the module stops.
Note that the module is not yet fully home.
16
IBM Expandable Storage Plus: 2104 Model DL1 Installation Guide
Advertisement
Table of Contents
