Connecting The 2104 To The Using System - IBM 2104 DL1 Installation Manual

Connecting the 2104 to the Using System

1. Referring to your preinstallation planning information, check how the 2104 is to be
connected to the using system.
1. Attach identification labels to the external SCSI signal cables (see the appropriate
Adapters, Devices and Cables Information manual for details).
2. Refer to Figure 17.
Figure 17. Plug in the SCSI Signal Cable
3. Plug the SCSI signal cables into the connectors 1 on the SCSI interface cards.
4. Tighten the retaining screws 2 . You need a small screwdriver to do this. DO NOT
USE A POWER-DRIVEN SCREWDRIVER.
5. Ensure that all signal cables are correctly connected. An incorrect connection can
prevent the 2104 from becoming ready.
Installing a 2104 Model DL1
23