Chapter 2. Weight Considerations: Model 092 Expansion Enclosure; Weight Of Expansion Enclosure Parts - IBM Elastic Storage System 5000 Series Hardware Manual

Table of Contents

Advertisement

Chapter 2. Weight considerations: Model 092
expansion enclosure
Before you install, move, or perform service on a Model 092 expansion enclosure, you must be prepared
to handle the weight of the enclosure and its parts.
Safety notices and considerations
Important: Always read and follow the safety notices and instructions before you install, move, or service
the expansion enclosure and its parts. For more information, see "Danger and caution notices" on page 4.
• Do not exceed the specified maximum load of the rack where the enclosure is to be installed.
• Do not exceed any load limit of the building and flooring where the enclosure is to be installed.
• Always use a suitably rated mechanical lift or four persons when you are performing any of the following
tasks:
– Removing the expansion enclosure from its packing material
– Lifting and installing the expansion enclosure in the rack for the first time
– Reinstalling the expansion enclosure after you complete a service task (for example, replacing the
enclosure FRU).
• At least three persons are required to move the enclosure while it is in the rack (if you are moving the
enclosure off the rails). Even after the drives, power supply units, secondary expander modules,
canisters, fans, and top cover are removed, the enclosure weighs approximately 43 kg (95 lbs).
• To maximize rack stability, always install the expansion enclosure in the lowest possible position in the
rack.

Weight of expansion enclosure parts

Table 2 on page 15 summarizes the weight and quantity of the parts (FRUs) that are shipped with the
Model 092 expansion enclosure.
Table 2. Weight of expansion enclosure parts
FRU description
Enclosure FRU
Rail kit
Front fascia (4U front cover)
Display panel assembly
PSU fascia (1U cover)
Power supply unit (PSU)
Secondary expansion module
Fan module
Expansion canister
Cable management arm
(lower and upper arms)
Top cover
©
Copyright IBM Corp. 2020
Weight per unit
kg
lbs
42.5
93.696
9.231
20.351
0.303
0.668
0.020
0.044
0.010
0.022
3.335
7.352
0.826
1.821
0.890
1.962
1.588
3.501
1.373
3.027
3.720
8.201
Total weight
Quantity
shipped
kg
1
42.500
1
9.231
1
0.303
1
0.020
1
0.010
2
6.670
2
1.652
4
3.560
2
3.176
1
1.373
1
3.720
lb
93.696
20.351
0.668
0.044
0.022
14.705
3.642
7.848
7.002
3.027
8.201
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elastic storage system 5147-092

Table of Contents