Table of Contents
Advertisement
7. Lay the disk drive module on its side as shown in Figure 6. It rests on four blue
supports (not visible in the figure) on the bottom of the disk drive module. This
prevents the disk drive module from falling over and becoming damaged.
Figure 6. Disk Drive Module on its Side for Safe Storage
Note: It is recommended that the removed disk drive modules be kept in the sequence
they were in before they were removed from the 2104 disk enclosure.
8. Repeat steps 3 through 7 for each disk drive module. Ensure that you remove all
the disk drive modules from the 2104 disk enclosure.
Installing a 2104 Model DL1
11
Advertisement
Table of Contents
