Installing A 2104 Model Dl1 Into An Rs/6000 Rack - IBM 2104 DL1 Installation Manual

Installing a 2104 Model DL1 into an RS/6000 Rack

Installing a 2104 Model DL1 into an RS/6000 Rack is done by:
1. Preparing the RS/6000 rack
2. Removing the disk drive modules from the 2104 Model DL1
3. Installing the 2104 Model DL1 into the rack
4. Reinstalling the disk drive modules into the 2104 Model DL1
The procedure that is recommended is described in the next four sections of this book,
but first you need to check that you have received all the parts required for your 2104
Model DL1.
3
Installing a 2104 Model DL1