Konica Minolta magicolor 4690MF Service Manual page 54

Field Service Ver. 1.0 May 2008
[2]
[1]
[2]
[1]
[2]
[1]
[2]
[1]
[3]
A00FF2C009DA
A00FF2C507DA
[3]
A00FF2C010DA
3. Periodical check
8. Remove the E-ring [1] and remove
the bearing [2]. Then, slide the tray 1
feed roller assy [3] in the direction of
the arrow shown.
NOTE
• When reinstalling the tray 1 feed
roller assy, make sure that the shaft
[2] sits on the front side of the stop-
per [1] as shown in the illustration.
9. Remove the E-ring [1], and remove
the clutch [2] and the feed roller [3].
11