Konica Minolta magicolor 4690MF Service Manual page 164

Field Service Ver. 1.0 May 2008
(1) SUBNET MASK
Function • This function is used to specify the subnet mask value for the network.
NOTE
Use
• Please consult customer's network administrator for information about the sub-
net mask to use.
• Setting LAN connect to WAN the net mask address.
NOTE
Setting/
• If Auto is selected for [IP ADDR. SETTING], the items of [SUBNET MASK] and
procedure
[GATEWAY] are automatically set. Key entry is therefore disabled for [SUBNET
MASK] and [GATEWAY].
(2) GATEWAY
Function • This function is used to specify the default gateway (IP address) of a router on the net-
work.
NOTE
Use
• Please consult customer's network administrator for information about the gate-
way to use.
• Setting LAN address.
NOTE
Setting/
• If Auto is selected for [IP ADDR. SETTING], the items of [SUBNET MASK] and
procedure
[GATEWAY] are automatically set. Key entry is therefore disabled for [SUBNET
MASK] and [GATEWAY].
C. DNS CONFIG.
Function • Sets whether or not the DNS server setting is to be specified.
• If specifying the DNS server setting, the SMTP server can be specified as a host name
when using network scanning.
Use
• If [ENABLE] is selected, type in the IP address of the DNS server.
• If [DISABLE] is selected, the DNS server cannot be referenced.
• The default setting is DISABLE.
Setting/
procedure
D. DHCP
• Automatically acquires an IP address from the DHCP server, if there is one in the net-
Function
work, and specifies whether to load other network information.
Use • To automatically acquire an IP address and load other network information.
• The default setting is ENABLE.
Setting/
procedure
NOTE
• When setting the IP address manually, the [DHCP] setting is changed to [DIS-
ABLE].
"DISABLE"
DISABLE
ENABLE
"ENABLE"
11. Utility mode
121