Field Service Ver. 1.0 May 2008
[2]
8. Remove the backup battery from the MFP board.
See P.76
NOTE
• When the MFP board is replaced, upgrade the firmware to the latest version.
See P.43
7.3.10
Print control board (PRCB)
1. Remove the rear cover.
See P.50
2. Remove the right rear cover.
See P.50
[1]
[1]
[1]
[2]
[3]
A0FDF2C017DA
[1]
[2]
[1]
A0FDF2C013DA
6. Remove the screw [1].
7. Remove seven screws [2], and
remove the MFP board [3].
3. Remove seventeen screws [1], and
remove the board protective shield
[2].
7. Other
53