Copy Setting; Paper Priority; Quality Priority; Density Priority - Konica Minolta magicolor 4690MF Service Manual

11. Utility mode
B. FUSER UNIT
Function • Resets the fuser unit counter.
Use • To use when the fuser unit has been replaced.
1. Select [SUPPLIES REPLACE] → [FUSER UNIT].
Setting
/procedure 2. Press the Select key.
3. Press the Select key and reset the counter.
C. TRANSFER ROLLER
Function • Resets the transfer roller counter.
Use • To use when the transfer roller has been replaced.
1. Select [SUPPLIES REPLACE] → [TRANSFER ROLLER].
Setting
/procedure 2. Press the Select key.
3. Press the Select key and reset the counter.

11.5 COPY SETTING

11.5.1

PAPER PRIORITY

Function • Selects the priority tray.
Use • To change the priority tray
• The default setting is TRAY2.
Setting/ TRAY1
procedure
NOTE
• If Tray 3 is not installed, TRAY3 does not appear.
11.5.2

QUALITY PRIORITY

Function
• To set the priority image quality mode that is selected when the power switch is turned
ON.
Use
• The default setting is MIX.
Setting/
"MIX"
procedure
FINE/MIX
11.5.3

DENSITY PRIORITY

Function
• To set the priority density that is selected when the power switch is turned ON
Use
• The default setting is AUTO.
Setting/
procedure
132
"TRAY2"
TEXT
FINE/TEXT
"AUTO"
Field Service Ver. 1.0 May 2008
TRAY3
PHOTO
FINE/PHOTO
MANUAL