Konica Minolta magicolor 4690MF Service Manual page 168

Field Service Ver. 1.0 May 2008
G. SMTP TIMEOUT
Function
• This function is used to specify the length of time (in seconds) before the connection to
the SMTP server times out. (30 to 300 seconds)
Use
Setting/ • The default setting is 60sec.
procedure • The time out period can be between 30 and 300 seconds.
H. TEXT INSERT
Function
• This function is used to specify whether or not to insert text explaining that an image has
been attached to an e-mail message, when sending scan data as an E-mail attachment.
Use
• The default setting is OFF.
Setting/ "OFF"
procedure
• OFF: If OFF is selected, a blank e-mail message will be sent.
• ON: If ON is selected, the following text is inserted in the e-mail message.
I. POP BEFORE SMTP
(1) DISABLE/ENABLE
Function
• This function is used to set whether or not to use POP before SMTP.
Use
• The default setting is ENABLE.
Setting/
procedure
• When [ENABLE] is selected, set the time (second) for POP BEFORE SMTP.
The default setting is "5sec". (0 - 60sec)
(2) POP3 SERVER ADDR.
Function • This function is used to enter the IP address or host name of an POP3 server.
NOTE
• Please consult customer's network administrator for information about the IP
Use
address to use.
• The [DNS] must have been specified before specifying the host name for the
POP3 server.
Setting/
• Up to 64 characters can be entered for the host name.
procedure
(3) POP3 PORT NO.
Function • This function is used to enter the port number for the POP3 server.
NOTE
Use
• Please consult customer's network administrator for information about the port
number to use.
Setting/
• The default setting is "110". (1 - 65535)
procedure
ON
DISABLE "ENABLE"
11. Utility mode
125