Usb Setting; Comm. Setting - Konica Minolta magicolor 4690MF Service Manual

Field Service Ver. 1.0 May 2008
L. LDAP PASSWORD
Function • To set the password for connecting to LDAP server.
Use • To set the password for connecting to LDAP server.
1. Select the [LDAP PASSWORD], then press Select key.
Setting/
2. Type in the password, then press Select key.
procedure
• The password can contain a maximum of 32 characters.
M. DOMAIN NAME
Function • To set the domain name for connecting to LDAP server.
Use • To set the domain name for connecting to LDAP server.
1. Select the [DOMAIN NAME], then press Select key.
Setting/
2. Type in the domain name, then press Select key.
procedure
• The domain name can contain a maximum of 64 characters.
11.4.6

USB SETTING

Function
• To set the operating system of the PC to which this machine is connected with a USB
cable.
Use
• The default setting is Windows.
Setting/
procedure
11.4.7

COMM. SETTING

A. TONE/PULSE
Function • This function can be used to specify the dialing system. If this function is not correctly
set to the type of dialing system used, faxes cannot be sent. Select the correct setting
after checking which type of dialing system is used by your telephone line.
• There are two types of telephone dialing systems: tone dialing (PB) and pulse dialing
Use
(DP10pps or DP20pps). Faxes cannot be sent if this machine is not set to the system
used by your telephone line. Select the correct setting after checking which type of dial-
ing system is used.
• The default setting is TONE.
"TONE": Tone line
PULSE 10pps: Pulse line of 10 pps
Setting/
PULSE 20pps: Pulse line of 20 pps
procedure
NOTE
• If [PTT SETTING] in the [USER SETTING] menu is set to USA, CANADA or NEW
ZEALAND, the settings cannot be changed.
B. LINE MONITOR
Function
• This function can be used to set the volume when monitoring communication to [HIGH],
[LOW] or [OFF].
Use
• The default setting is LOW.
Setting/
procedure
OFF
"Windows"
"LOW" HIGH
Mac
11. Utility mode
129