Konica Minolta magicolor 4690MF Service Manual page 97

7. Other
6. Remove parameter chip [1] from the print control board.
NOTE
• When the print control board (PRCB) has been replaced, be sure to remount
parameter chip. Unmount parameter chip from the old print control board and
mount it on the new print control board.
54
A0FDF2C018DA
[1] [2]
[1]
A0FDF2C019DA
Field Service Ver. 1.0 May 2008
4. Disconnect all connectors and flat
cables from the print control board.
5. Remove eight screws [1], and
remove the print control board [2].
[1]
A00FF2C028DA