7. Other
7.3.36
Duplex transport roller clutch (CL13)
1. Remove the print control board.
See P.53
2. Remove the duplex exit roller clutch unit.
See the steps 1 to 2 on P.90 "Duplex exit roller feed clutch".
[1]
[1]
94
[2]
A00FF2C104DA
[1]
[2]
[4]
[3]
A00FF2C105DA
[2]
A00FF2C106DA
Field Service Ver. 1.0 May 2008
3. Remove two screws [1], remove the
duplex transport roller clutch [2].
4. Remove the E-ring [1], gear [2],
bearing [3], and spring [4].
5. Remove the screw [1], and remove
the metal plate [2].