Display Mode "Day / Year / Total - Fronius IG 2000 Operating Instructions Manual

Display mode
"Day / Year /
Total"
Display mode "Day" ... shows readings for the current day
- energy supplied (kWh)
- yield (currency can be selected)
- CO
- maximum power supplied (Watts)
- maximum grid voltage (Volts)
- minimum grid voltage (Volts)
- maximum module voltage (Volts)
- energy drawn from the grid (kWh)*
- maximum module temperature (°F; alternatively °C)*
- minimum module temperature (°F; alternatively °C)*
- maximum ambient temperature (°F; alternatively °C)*
- minimum ambient temperature (°F; alternatively °C)*
- maximum irradiance (W/m
- operating hours for FRONIUS IG unit
* optional - if the DatCom component for the required option is not
Important! For the FRONIUS IG unit, the day begins when it swit-
ches on. If the DC supply line is disconnected, the parameters will be
re-set after repeating the start-up.
This does not apply if a Datalogger is connected to the FRONIUS IG.
If the Datalogger is available, the display values listed always apply
for the whole day, beginning at 0:00am, ending at 0:00am the follo-
wing day.
Display mode "Year" ...shows readings for the current calendar year,
from January 1
Display mode "Total" ...shows readings since original start of operati-
on of the FRONIUS IG unit.
- select display mode "Day" / "Year" / "Total" (chapter "The Display")
- the first display function of the display mode selected will appear
reduction (lb)
2
available, the message "N.A." (not available) is displayed.
st
(only in conjunction with Datalogger)
2
)*
24