IMPORTANT SAFETY INSTRUC-
TIONS - SAVE THESE INSTRUC-
TIONS
General
This manual contains important instructions for the FRONIUS IG
2000, 3000, 2500-LV, 4000, 5100, 4500-LV that shall be followed
during installation and maintenance of the inverters.
Electrical installations must be made in accordance with the National
Electrical Code, ANSI/NFPA 70, and any other codes and regulations
applicable to the installation site.
To reduce the risk of fire, do not connect multiwire branch circuits to
an AC load center (circuit breaker panel).
Only qualified installers are authorized to open the connection area.
Housing
Do not open the connection area when the inverter is under voltage.
Only Fronius-trained service staff may open the upper portion (power
stage) of the inverter, and only when it is not under voltage.
WARNING! Incorrect operation and work performed incorrectly
can cause serious injury & damage! Only qualified staff are
authorized to install your FRONIUS IG and only within the sco-
pe of the respective technical regulations. Do not start operati-
on or carry out maintenance work before you have read the
chapter "Safety Regulations"!
WARNING! These servicing instructions are for use by qualified
personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that specified in the operating
instructions unless you are qualified to do so.
4