Table of Contents
Advertisement
LocalNet
System upgra-
Your FRONIUS IG can be upgraded through the addition of several Dat-
ding / plug-in
Com components for data monitoring:
card system
- Datalogger (for recording and managing the data of your photovoltaic
- Interface Card Easy sends all relevant working parameters in a well
- Personal Display FRONIUS IG
- Various large displays (FRONIUS IG Public Display)
- Sensors (temperature sensors / irradiation sensors / ...)
FRONIUS has developed the LocalNet to provide unrestricted individual
use of the system's upgrades.
For more information on Fronius communication products, please refer to
the individual product literature, www.fronius-usa.com.
For complete installation instructions on the DatCom system, please see
the DatCom Manual provided with your FRONIUS Datalogger. This infor-
mation is also available on the web at „www.fronius-usa.com".
Datalogger
The Datalogger is the core of the LocalNet. It coordinates data transmissi-
on and ensures quick and safe distribution and storage of large volumes
of data.
COM Card
In order to connect the FRONIUS IG unit to the LocalNet, a COM Card is
required
- COM Card ......................... for exchanging data between your FRONI-
The COM Card has the following connection terminals:
- 2 x RJ45 sockets labelled "IN" and "OUT" for connection of CAT 5
- Power supply socket for the connection of 12 V low voltage power pack
If the COM Card is to be installed in the field, proceed as follows:
system on your personal computer, including modem tie in)
defined RS-232 protocol
cables
(only necessary in certain cases as described in the FRONIUS IG Dat-
Com manual).
US IG unit and the LocalNet.
56
Hide quick links:
Advertisement
Table of Contents
