Replacing The Complete Rear Light (Led Lighting Unit) - Invacare Storm4 Service Manual

SERVICE MANUAL

8.7.14 Replacing the complete rear light (LED lighting unit)

Requirements:
· 4 mm Allen key
· 13 mm socket spanner
Removing the rear light
·
Remove the rear and the centre cover as described in chapters 8.1.1 and 8.1.2.
·
Carefully note the location of the cable and the connection locations of the various plugs. Either
mark each plug and socket, or take a photograph with a digital camera.
·
Loosen the cable leading to the lighting PCB from the rear light affected (2).
·
Loosen the nut (1) with a 13 mm socket spanner.
·
Lift off the plastic casing (2).
88
®
Invacare - STORM
4