Replacing The Travelling Armrest - Invacare Storm4 Service Manual

SERVICE MANUAL

8.17.7 Replacing the travelling armrest

Requirements:
· 4 mm Allen key
Dismantling the travelling armrest
·
Undo and remove the four Allen screws in the backrest plastic cover using a 4 mm Allen key.
·
Remove the plastic cover.
·
If necessary, remove the remote together with its cable.
·
On the torque support, loosen the locating pin (3) bolt (2) with a 4 mm
Allen key.
·
Raise the armrest slightly and remove the locating pin.
·
Pull the armrest out of the torque support to the side. If you raise and lower the armrest a few
times it is easier to remove.
·
Replace the armrest.
Refitting the travelling armrest
·
Replace the parts in the reverse order.
·
To complete, check all vehicle functions.
The new armrest will need to be adjusted to suit the user. Please refer to the mobility device
operating manual for detailed information.
152
®
Invacare - STORM
4