Replacing The Motor / Gearbox Coupling (Ssd Motor) - Invacare Storm4 Service Manual

SERVICE MANUAL

8.11.5 Replacing the motor / gearbox coupling (SSD motor)

CAUTION: Danger of crushing!
The motor / gearbox unit is very heavy. Danger of injury to the hands!
· Pay attention to the heavy weight.
Requirements:
· 10 mm socket wrench
Uninstalling the motor / gearbox coupling:
·
Uninstall the motor / gearbox unit, as described in chapter 8.11.2/8.11.3.
·
Use the 10 mm socket wrench to loosen and remove the self-securing nut (4).
·
Remove the carriage bolt, which secures the sealing ring (2).
·
Carefully bend the sealing ring apart and remove it.
WARNING!
Danger of damage to the wheelchair if the coupling is not serviced correctly.
· Be careful not to damage the coupling mechanism during maintenance work.
·
Carefully pull the motor (3) and the gearbox (1) apart.
·
Remove the component parts of the coupling.
·
If necessary replace the coupling.
114
®
Invacare - STORM
4