Replacing The Motor/Transmission Unit (Storm X-Plore) - Invacare Storm4 Service Manual

Hide thumbs Also See for Storm4:
Table of Contents

Advertisement

SERVICE MANUAL
8.11.3 Replacing the motor/transmission unit (Storm
WARNING: Danger of crushing!
The mobility device is very heavy. Injury hazard to hands and feet!
· You should seek help from a second person.
Injury hazard caused by uncontrolled movement of the mobility device!
· Switch the power supply off (ON/OFF key).
· Engage the drive.
· Before raising the vehicle, secure the wheels by blocking them with wedges.
ATTENTION: Danger of crushing!
The motor gearbox unit is extremely heavy. Injury hazards to hands!
· Please note the high weight
Requirements:
· 5 mm Allen key
· 6 mm Allen key
· 13 mm socket spanner
· 19 mm socket spanner
· long wooden blocks, min. 14 x 14 x 30 cm
Removing the motor/transmission unit:
·
Remove the rear and the centre battery compartment cover as described in chapters 8.1.1 und
8.1.2.
·
Pull the motor plug out of the power module.
·
Open the cable clamps and expose the motor cable.
·
Remove the drive wheel as described in chapter 8.10.1.
·
Remove the wheel hub as described in chapter 8.10.3.
·
Remove the splash guard as described in chapter 8.1.6.
110
Invacare
4
X-plore)
®
4
- STORM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents