8.5.6
Replacing a light bulb in the rear (conventional lighting system)
Requirements:
● Phillips screwdriver size 2
● Loosen the Phillips head screw in the transparent cover of the tail lamp / turn indicator
combination.
● Remove the transparent plastic cover.
● Replace the defective light bulb.
● Reposition the cap and tighten the Phillips head screw hand-tight.
8.5.7
Replacing the LEDs in the rear (LED lighting system)
● Individual LEDs are not intended to be replaced. Replace the complete red tail lamp and/or the
yellow turn indicator, as described in chapter 8.5.10.
63