Table of Contents
Advertisement
Adjusting the antenna
azimuth and elevation
This chapter describes the process by which to adjust the antenna
azimuth and elevation to the correct position for optimum
transmission and reception. As the installer, you will perform
these procedures during the antenna pointing process. This
chapter discusses the mechanical adjustments used to modify the
position of the antenna only. It does not discuss the pointing
process itself. For information on pointing the AN8-098P and all
HughesNet Ka-Band antennas, see the HughesNet Ka-Band
Antenna Pointing Guide (1037663-0001).
This chapter contains the following sections:
• Adjusting the elevation on page 44
• Adjusting the azimuth on page 46
• Adjusting the antenna azimuth and elevation
1037750-0001 Revision A
43
Advertisement
Table of Contents
