Table of Contents
Advertisement
The model AN8-098P
antenna
This Installation Guide explains how to assemble and install the
Hughes AN8-098P .98m Ka-band antenna. It is written for
qualified installers who are familiar with satellite antenna
installation practices, and are capable of properly applying the
information presented herein.
This chapter presents an overview of the AN8-098P antenna, a
summary of the steps used to assemble and install the antenna,
and supplemental information on tasks related to antenna
installation. These topics are included in the following sections:
• The model AN8-098P antenna on page 1
• Antenna installation summary on page 2
• Tasks related to antenna installation on page 4
The Hughes model AN8-098P antenna is designed for Ka-band
applications. Each HughesNet antenna station consists of an
antenna assembly and an indoor unit (IDU), which can be either a
satellite modem or a satellite router. The IDU communicates with
both the HughesNet satellite and the Network Operations Control
Center (NOCC) via the antenna and radio assembly.
The antenna is connected to the IDU by an intra-facility link
(IFL) consisting of two cables: a transmit cable and a receive
cable.
Chapter 1
Overview
Chapter 1 • Overview
1037750-0001 Revision A
1
Advertisement
Table of Contents
