Table of Contents
Advertisement
Antenna installation
summary
Chapter 1 • Overview
2
1037750-0001 Revision A
Figure 1: The Hughes model AN8-098P .98 m satellite antenna
This section lists the basic steps and related tasks used to
assemble and install the antenna. These procedures are listed in
the order in which they are to be performed. For more detailed
information on each task, refer to the chapters and documents
listed.
1. Explain the installation process to the customer.
2. Conduct a site survey with the customer to identify a suitable
location for the antenna. See the HughesNet Antenna Site
Preparation and Mount Installation Guide (1035678-0001)
for details.
3. Install and apply power to the IDU, following the instructions
in the installation guide for the specific IDU you are
installing.
Note: You must install the IDU before installing the
antenna, to determine the proper pointing values (azimuth and
elevation).
Advertisement
Table of Contents
