Table of Contents
Advertisement
Chapter 3 • Installing the antenna and radio assembly
24
1037750-0001 Revision A
Figure 16: Attaching the support rods to the reflector (right rod shown)
5. Attach the free ends of the support rods to the feed support
Figure 17: Attaching the support rods to the feed support arm
6. Secure the bolt with a 7/16-inch nut and tighten.
7. Tighten the two bolts securing the rods to the reflector.
arm as shown in Figure 17, using a single 7/16 x 1.25-inch
bolt, lock washer, and flat washer.
Advertisement
Table of Contents
