Table of Contents
Advertisement
Adjusting the antenna
azimuth and elevation
This chapter describes the process by which to adjust the antenna
azimuth and elevation to the correct position. As the installer, you
will perform these procedures during the antenna pointing
process. This chapter discusses the mechanical adjustments used
to modify the position of the antenna only. It does not discuss the
pointing process itself. For information on pointing the
AN8-074R and all HughesNet Ka-Band antennas, see the
HughesNet Ka-Band Antenna Pointing Guide (1037663-0001).
This chapter contains the following sections:
• Adjusting the elevation on page 36
• Adjusting the azimuth on page 38
Chapter 5 • Adjusting the antenna azimuth and elevation
Chapter 5
1037751-0001 Revision A
35
Advertisement
Table of Contents
