Table of Contents
Advertisement
Chapter 3 • Installing the antenna and radio assembly
26
1037750-0001 Revision A
Figure 19: Determining the polarization setting
To reposition the polarizer:
1. Remove the two-piece polarizer collar by loosening and
removing the two Allen screws that hold it together.
2. Separate the polarizer from the TRIA and rotate it one quarter
turn (clockwise for LHCP or counter-clockwise for RHCP),
until the appropriate notch lines up with the key on the end of
the TRIA. As shown in Figure 20, the LHCP notch is
adjacent to the L on the polarizer and the RHCP notch is
adjacent to the R on the polarizer).
Advertisement
Table of Contents
