Table of Contents
Advertisement
The following sections describe each component of the antenna
kit.
Az/El mount assembly
The Az/El mount shown in Figure 4 consists of the Az/El canister,
the elevation scale, and the azimuth and elevation adjustment
tools.
The Az/El canister supports the antenna and secures it to the
mast. The elevation scale is used to measure the angle of antenna
elevation. The fine azimuth and elevation tools are used to finely
adjust the azimuth and elevation of the reflector during antenna
pointing. See the HughesNet Ka-Band Antenna Pointing Guide
(1037663-0001) for detailed instructions.
Figure 3: Az/El mount assembly
Chapter 2 • Antenna parts and required tools
9
1037750-0001 Revision A
Advertisement
Table of Contents
