Table of Contents
Advertisement
Chapter 3 • Installing the antenna and radio assembly
30
1037750-0001 Revision A
3. Position the feed horn against the waveguide as shown in
Figure 24.
Figure 24: Feed horn position
4. Fit the two halves of the feed horn collar around the ridge at
the point where the feed horn meets the waveguide, as shown
in Figure 25. When properly aligned, the seam formed by the
two halves of the collar will line up with the seam on the
waveguide as shown in the figure.
Figure 25: Attaching the feed horn collar
Advertisement
Table of Contents
