Table of Contents
Advertisement
Chapter 3 • Installing the antenna and radio assembly
22
1037751-0001 Revision A
Figure 15: Determining the polarization setting
To reposition the polarizer:
1. Remove the two-piece polarizer collar by loosening and
removing the two Allen screws.
2. Separate the polarizer from the TRIA and rotate it one quarter
turn (clockwise for LHCP and counter-clockwise for RHCP),
until the appropriate notch lines up with the key on the end of
the TRIA. As shown in Figure 16, the LHCP notch is
Advertisement
Table of Contents
