Table of Contents
Advertisement
INSTALLING THE MOUNT ON A WOODEN DECK POST
The satellite dish can be installed on a 6-inch x 6-inch Southern Pine wood deck support post. The post can be no more than 8 feet
tall. It must be adequately attached at top and bottom. Posts made of other species of wood may be used as long as their material
properties match or exceed those of Southern Pine. Posts made of other species of wood whose material properties do not match or
exceed those of Southern Pine require engineering evaluation and approval before being used. The satellite dish may not be installed
on an unsupported wooden post.
PARTS NEEDED
• Lag screws, 3/8-inch x 4-inch, Qty: 6
• Washers, 3/8-inch, Qty: 6
• Silicone sealant
12
TOOLS NEEDED
• Carpenter's level
• Pencil
• Ruler
• 9/16 and 1/2-inch socket wrench
Figure 7
• Electric drill
• Drill bits, 3/8, 1/4, and 1/8-inch
• Torque wrench (capable of torquing
up to 18 ft-lbs)
• Ladder
Advertisement
Table of Contents
