Table of Contents
Advertisement
Antenna installation
summary
Chapter 1 • Overview
2
1037751-0001 Revision A
Figure 1: The Hughes model AN8-074R .74m satellite antenna
This section lists the basic steps and related tasks used to
assemble and install the antenna. These procedures are listed in
the order in which they are to be performed. For more detailed
information on each task, refer to the chapters and documents
listed.
1. Explain the installation process to the customer.
2. Conduct a site survey with the customer to identify a suitable
location for the antenna. See the HughesNet Antenna Site
Preparation and Mount Installation Guide (1035678-0001)
for details.
3. Install and apply power to the satellite modem, following the
instructions in the installation guide for the specific satellite
modem you are installing.
Note: You must install the satellite modem before installing
the antenna to determine the proper pointing values (azimuth,
elevation, and tilt).
4. Connect your laptop computer to the satellite modem and
enter the installation parameters from the installation
reference sheet.
Advertisement
Table of Contents
