How To Change Vr Of Control Wheel - Korg wavestation Service Manual

4.
HOW
TO CHANGE VR
OF
CONTROL WHEEL
(
for
MG Wheel
)
COUNTERCLOCKWISE
Turn the VR shaft to the left
fully,
align the gutter
of the shaft
with the line on the wheel and insert the wheel
to
the
shaft.
(
for Pitch Wheel
>
WHEEL SPRING
1)
Attach the wheel spring
to the VR shaft after inserting
it
to the wheel
angle.
2)
Keep the gutter
of the
VR
shaft horizontally, align
it
with the line
on the wheel and insert the wheel to the
shaft.
The wheel should
be used as the
side which has the line
is
the front
for both MG Wheel and Pitch
Wheel.