Midi > Midi In Controls - Korg Pa3XLe User Manual

Professional arranger
Table of Contents

Advertisement

Clock Source
This parameter selects the MIDI Clock source for the Style Play
and Sequencer modes.
Note: In Song Play mode, the Internal clock is always used.
Note: This parameter is always set to "Internal" when the instru-
ment enters standby.
Internal
Internal, i.e. the clock generated by the Pa3XLe
Arranger and Player internal metronome.
External MIDI External from the MIDI IN port. In Style Play or
Sequencer mode, the Pa3XLe is slaved to an
external device connected to its MIDI IN port.
The Start/Stop and Play/Stop commands, as well
as the metronome tempo, cannot be selected
from the control panel of the Pa3XLe. Use the
external device to set the tempo and start or stop
the sequencer or arranger.
External USB As the above, but referred to the USB Device port.
Local Control On
The Local parameter connects or disconnects the keyboard from
the internal sound generator.
Note: This parameter is automatically set to On when the instru-
ment enters standby.
On
When you play the keyboard, MIDI data is sent
to the internal sound generator. If tracks are
assigned to a MIDI OUT channel, data is also
sent to the MIDI OUT or USB Device port.
Off
The keyboard is connected to the MIDI OUT or
USB Device port, but doesn't play the internal
sound generator.
This is very useful when working with an exter-
nal sequencer, to send notes and various MIDI
messages from the integrated keyboard and con-
trollers to the external sequencer, and then let the
sequencer send them back to the sound genera-
tor, without overlapping. See the MIDI chapter.
Note to RX Noise
RX Noises allow for Sounds to be more realistic. They are usu-
ally located above C7, depending on the Sound.
When this parameter is turned on, notes received from MIDI, or
performed by the internal Player, in the RX Noises range, are
recognized and converted to RX Noises. When off, notes are not
recognized.
Note: This parameter is automatically turned on when the instru-
ment is set to standby.
MIDI > MIDI In Controls
This page lets you program parameters for the MIDI IN and
USB Device port, like the Chord Recognition channel. All these
parameters can be saved into a MIDI Preset.
Midi In Controls
Midi In Octave Transpose
Use this parameter to determine if notes received on the MIDI
IN or USB Device ports have to be transposed.
On
Notes received on the MIDI IN or USB Device
port are transposed according to the Octave
Transpose setting for each track.
Off
Data received on the MIDI IN or USB Device
port are not transposed.
Track Mute Active
Use this parameter to determine if data received on the MIDI IN
or USB Device port can be played by muted tracks.
On
No data received on the MIDI IN or USB Device
port can play on a muted track.
Off
Data received on the MIDI IN or USB Device
port can play on a muted track.
Chord 1 Midi Channel
Chord 2 Midi Channel
Notes entering these channels on the MIDI IN or USB Device
port, are sent to the Arranger.
There are two separate Chord channels. This is very useful when
you have to send chords to Pa3XLe over two different channels
(something very common on MIDI accordions).
Off
Data received on the MIDI IN or USB Device
port are not sent to the Arranger.
1...16
Data received on these channels via the MIDI IN
or USB Device port are sent to the Arranger.
Upper Octave Transp (Transpose)
Octave transposition of data received on the MIDI IN or USB
Device port for the Upper tracks. For example, if you select the
+1 value, a C4 received via MIDI will play a C5 on the Pa3XLe.
This parameter may be useful to many MIDI accordion players,
whose MIDI interface may transmit on an unexpected octave.
-2...+2
Octave transpose value.
Global
265
MIDI > MIDI In Controls

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents