Recording in Edit mode
In Edit mode you can choose any single parameter that is available for
assignment via Knob Assign (SHIFT function) and record a movement for
Select a synth program. Choose a program that is not
saved with a modulation sequence (MOD SEQ [ON/
OFF] button is dark).
Select a timbre by pressing either the [TIMBRE1] or
[TIMBRE2] button. The button for the selected tim-
bre will blink.
Turn the modulation sequencer on by pressing the MOD SEQ [ON/
OFF] button. The button will light.
Turn the [PAGE] dial to enter Edit mode and select the page that con-
tains the parameter you want to record.
Press the MOD SEQ [REC] button to arm the modulation sequencer
While holding down notes on the keyboard, turn one of the knobs –
. Recording will begin the moment you turn the knob. When you've
reached the last step, the [REC] button will go dark and recording will
Turning the knob of a parameter that can't be recorded will not
When you play the keyboard, the modulation sequence will begin play-
ing back and will then continue to loop. Listen to the result.