Copier Initial; C Opier Initial - Konica Minolta 7135 User Manual

[2] Copier Initial

Initial settings are the settings that display automatically when the copier is powered
on, when Auto/Reset timer is operated, or when [AUTO RESET] key is pressed.
These settings can be changed by the Key Operator, as shown in this section.
Initially (i.e., at installation), the Basic Screen displays the following conditions to meet
Energy Star requirements:
Initial Setting
Copy Mode
Copy Density
Lens Mode
Paper Tray
Output Mode
When Initial settings are changed by the Key Operator, the new initial settings display
when the copier is powered on, when Auto Reset timer is activated, or when [AUTO
RESET] key is pressed.
The following initial settings can be changed by the Key Operator:
Copy mode
Copy density
Lens mode
Paper tray
Output mode
Non-Image
Area Erase
Setting procedures are described on the following pages.
NOTE:
The most commonly-used settings are established at installation. Before
changing any of the copier settings, be sure that you understand the
overall and long-range effect of the change.
: 1-1
: AES
: 1:1
: APS
: offset sort
: [RADF; 1-1, 1-2, 2-2, 2-1]
: [AES; manual]
: [AMS; ratio 0.25~4.00]
: [APS; trays 1, 2, 3, 4, or Multi-sheet bypass tray]
: [Exit tray 1, 2, 3, 4; Rotation On/Off; Non-sort, Sort,
Group, Staple; Staple location] (machine with Finisher)
[Exit tray 1, 2; Group, Rotation sort, Rotation group;
Rotation On/Off] (machine with Inner tray)
[Group, Rotation sort, Rotation group; Rotation On/Off]
(machine without Finisher)
: [Oblique erase, Rectangular erase; Original density]
Key Operator
Mode
System Initial
Copier Initial
Preset Key
E.C.M.
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Data
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
11
11-7
Key Operator
Mode