Memory; Output Without Finisher - Konica Minolta 7135 User Manual

Making Single-Sided Copies from Double-Sided Originals (2a1) (continued)
4.
Position originals FACE UP in the document feeder.
• See p. 3-2 to p. 3-4 for details on positioning originals.
• Use RADF store mode (p. 3-24 to p. 3-26) when the original count
5.
Press [START].
The machine starts to scan originals, then prints simplex copies when they are ready
for output.
Press [STOP/CLEAR] to suspend the scanning or printing job.
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.
HINTS
exceeds 50.
CAUTION
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Using

Memory

Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode
3-23