Weekly Timer; W Eekly Timer; Key Operator Data; Weekly - Konica Minolta 7135 User Manual

[9] Weekly Timer

This function can be accessed only by the Key Operator after a unique 4-digit Weekly
Timer master key code is entered.
The Weekly Timer is a copier management function that shuts down power to the
machine on a daily or hourly basis, and can be programmed specifically for lunch
breaks, weekends and holidays, or any time the copier is not required.
In Addition, Timer Interrupt can be enabled (with or without a password requirement)
to allow temporary use of the machine during periods when power is shut down by the
Timer function.
Conditions required to use the Weekly Timer:
• The power plug is inserted into the socket.
• The power switch is turned on.
• The current date and time are correctly set.
If the Weekly Timer needs to be activated on your machine, contact your service rep-
resentative.
The following Weekly Timer settings can be made.
[1] Weekly Timer Setting
Enable and disable the Timer function.
[2] Weekly Timer Copier ON/OFF Time Set
Specify the times that the copier will turn ON and OFF for each day of the week or
the entire week.
[3] Machine Working Day Individual Set
Specify the working days of the machine by the Timer, for all Mondays through
Sundays, and/or individually for each day of the given month.
[4] Lunch Hour Off Function
Specify the lunch time interval during which the copier will go off and on.
[5] Password Setting
Require Password entry for the Timer off function and establish the amount of
usage time.
NOTES:
1 The time is set in terms of the 24 hour clock, where hour [1] is the first
2 The [AUTO RESET] key is used to change numbers determined by the
hour after midnight and hour [24] is the hour of midnight. For example, 6
a.m. is 06:00 hours; 6 p.m. is 18:00 hours.
SET touch key.
Key Operator
Mode
System Initial
Copier Initial
Preset Key
E.C.M.
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Data

Weekly

Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
11
11-31
Key Operator
Mode