Main Body Specifications - Konica Minolta 7135 User Manual

Main Body Specifications

Recommended Operating Environment
These specifications are subject to change without notice.
6-2
Product Name
Configuration
Photoreceptor
Method
Toner
Warm Up
Auto Reset
First Copy Out Time
Copy Rate
Continuous Copy
Voltage
Frequency
Grounding
Power Consumption
Noise Level (full system)
Automatic Modes
Magnification
Originals on Platen
Konica 7022/7130/7135
Semi-console with stationary platen
OPC drum
Laser Electrostatic
Black, cartridge type
50°~86°F (10°~30°C), 10~80% RH
Approx. 30 seconds @68°(20°C), 50% RH
Off/30 sec./1 min./1.5 min./2 min./2.5 min./3
min./3.5 min./4 min./4.5 min./5 min.
From Platen Glass:
7022/7130: 5 sec. for 8.5"x11"
7135: 4.2 sec. for 8.5"x11"
7022: 22 cpm: 8.5"x11", 5.5"x8.5"R
18 cpm: 8.5"x11"R
16 cpm: 8.5"x14"
14 cpm: 11"x17"
7130: 30 cpm: 8.5"x11", 5.5"x8.5"R
20 cpm: 8.5"x11"R
17 cpm: 8.5"x14"
15 cpm: 11"x17"
7135: 35 cpm: 8.5"x11", 5.5"x8.5"R
21 cpm: 8.5"x11"R
16 cpm: 8.5"x14"
15 cpm: 11"x17"
1~999 copies
120V/12A
60Hz
Isolation recommended
Max. 1,170 VA (full option)
Approx. 66 dB (A) or less, during copying
AMS, AES (plus 9-level manual density),
APS detects 11"x17", 8.5"x14", 8.5"x11"R,
8.5"x11", 5.5"x8.5"R
Presets: 0.50, 0.65, 0.77, 1.29, 1.55, 2.00
3 User Sets - 0.25~4.00, set by key operator
Zoom range - 0.25~4.00 in 1% steps
Max. size: 11"x17" (280 mm x 432 mm)