Magnification - Konica Minolta 7135 User Manual

[3] Magnification

Set the magnification ratio you initially want to display after the user turns the power
on or after Auto/Reset restores the Initial settings.
❒ Setting options: AMS; 1.00; ratio 0.25~4.00
Key Operator Mode Screen
Procedure
1 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 3.
Magnification to display the Magnification Initial Setting Screen.
The default setting is 1.00.
2 Select the desired setting from the Magnification Initial Setting Screen:
To select 1.00 if it is not already displayed, touch 1.00.
To select another ratio, touch upper/lower arrow key to display the desired ratio, or
enter a 3-digit ratio using the keypad on the Control panel.
To select AMS, touch AMS.
11-10
NOTICE:
This setting should not conflict with the Initial setting for Paper Tray. For
example, if APS is selected for the initial paper tray setting, a ratio setting
other than AMS will be ignored.
[2] Copier Initial (continued)
Copier Initial Setting Screen
Magnification Initial Setting Screen