Vertical/Horizontal Zoom Mode - Konica Minolta 7135 User Manual

Vertical/Horizontal Zoom Mode

Use the Vertical/Horizontal zoom mode to reduce or enlarge vertical and horizontal
dimensions, independently.
>>>Vertical/Horizontal Zoom Mode Specifications<<<
❒ Vertical/Horizontal zoom range: 0.25~4.00
❒ Incompatible Conditions: APS, AMS, Reduce & Shift in Image Shift, Repeat mode
in Repeat
The figure shown below is the sample image using the Vertical/Horizontal zoom.
Length: 0.50, Width: 0.50
Length: 1.00, Width: 0.50
Length: 2.00, Width: 0.50
Length: 4.00, Width: 0.50
1.
Touch ZOOM on the Basic Screen.
The popup menu for setting a zoom ratio will be displayed.
7-6
Length: 0.50, Width: 1.00
Width
Length: 1.00, Width: 1.00
Length: 2.00, Width: 1.00
Length: 4.00, Width: 1.00
Reminder!
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
Length: 0.50, Width: 2.00
Length: 1.00, Width: 2.00
Length: 2.00, Width: 2.00
Length: 4.00, Width: 2.00
Length: 0.50, Width: 4.00
Length: 1.00, Width: 4.00
Length: 2.00, Width: 4.00
Length: 4.00, Width: 4.00