Password Setting - Konica Minolta 7135 User Manual

[5] Password Setting

Use this password setting mode to establish a 4-digit password requirement for using
Timer Interrupt function. The default password of 0000 allows the timer function to be
interrupted without the requirement for password entry.
Weekly Timer Setting Menu Screen
Procedure
1 Touch [5] Password setting to display the W.T. Interrupt Password Setting Screen.
2 Use the touch screen keypad to enter a 4-digit password, and then touch OK to
complete the setting.
NOTE:
When the password setting is 0000, timer interrupt can be used simply by
turning the copier OFF, then ON.
3 Touch RETURN to return to the Weekly Timer Setting Menu Screen.
4 Touch RETURN to restore the Key Operator Mode Screen.
5 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
[9] Weekly Timer (continued)
W.T. Interrupt Password Setting Screen
Key Operator
Mode
System Initial
Copier Initial
Preset Key
E.C.M.
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Data
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
11
11-39
Key Operator
Mode