Memory Switch; M Emory Switch - Konica Minolta 7135 User Manual

[12] Memory Switch

This function allows you to change the Memory Settings listed below. See pp. 11-
44~11-46 for details on Memory Settings.
SW No. Item
No. 01: Auto reset timer
No. 02: AUTO RESET effect
No. 03: Load RADF effect
No. 04: Non Image A. Erase
No. 05: RADF frame erasure
No. 06: Auto tray switch
No. 07: Platen APS
No. 08: RADF APS
No. 09: ATS/APS (Bypass)
No. 10: ATS/APS SW (Tray 1)
No. 11: ATS/APS SW (Tray 2)
No. 12: ATS/APS SW (Tray 3)
No. 13: ATS/APS SW (Tray 4)
No. 14: Platen AMS
No. 15: RADF AMS
No. 16: Staple mode reset
No. 17: Key click sound
No. 18: Job memory recall
No. 19: Sheet insertion
No. 20: 5.5x8.5 orig.type
No. 21: Rotation
No. 22: 1 SHOT indication
No. 23: AUTO START
No. 24: No- printing timer
No. 25: Power save key
No. 26: Bypass tray size
11-42
Setting (default is underlined)
OFF / 30 sec. / 60 sec. / 90 sec. / 120 sec./
150 sec. / 180 sec. / 210 sec. / 240 sec. /
270 sec. / 300 sec.
Full-Auto / Initial
RADF / RADF+Auto Reset
ON/ APS/AMS only
None / 1mm / 2mm / 3mm / 4mm / 5mm
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / Low / High
OFF / ON
Tray 1 / Tray 2 / Tray 3 / Tray 4 / Bypass
Landscape / Portrait
OFF / ON / APS/AMS/Reduce / APS/AMS
only / APS only
1 sec. / 2 sec. / 3 sec. / 4 sec. / 5 sec.
OFF / ON
OFF / 15 sec. / 30 sec. / 60 sec. / 90 sec.
Power Save / Shut Off
Standard size / Non standard size