Interrupt Mode - Konica Minolta 7135 User Manual

3-46
DETAILS
For particular jobs in progress, copying will cease only after certain phases
of the immediate operation are completed, as indicated by the [INTER-
RUPT] LED conditions described below.
• Collectively printing image stored in memory
The LED blinks until one set of the current job is printed.
Then the LED remains steady for the temporary job performed in

Interrupt mode.

• Scanning originals into memory
The LED blinks until scanning is completed for all originals placed in the
document feeder.
Then, the LED remains steady for the temporary job performed in
Interrupt mode.
• Scanning originals into memory while printing in Reserve mode
The LED blinks until the copier completes the current printing job, scans
all originals placed on the document feeder, and prints one set of the
Reserved job.
The LED remains steady for the temporary job performed in Interrupt
mode.
Interrupt Copying (continued)