Basic Screen - Konica Minolta 7135 User Manual

Basic Screen

The Basic Screen displays when copying operation becomes available after warm-up.
3 Message area
2 Icon area
1 SETTING key
14 MODE setting area
1 SETTING key is selected when the screen displays basic copying conditions.
Touch this key to return to the current print job settings when making selections for
a reserve job.
When any trouble occurs during a reserve setting, "SETTING" changes to flashing
"JAM" or "ADD PAPER" according to the problem. See p. 5-7 to p. 5-9.
2 Icon area displays the following icons.
: ADD TONER icon is displayed when toner supply becomes low.
: PM CALL icon is displayed when preventive maintenance is due.
specific finisher mode is selected. When Staple mode is selected, this icon indi-
cates the number of staples and staple position.
: ROTATION icon is displayed when the Rotation is automatically functioning.
3 Message area displays the machine status and procedure required at that time.
4 RESERVE key is touched to select copy conditions for a subsequent job while the
current scan/print job is in progress.
5 JOB LIST key is touched to view the current job status, to change the printing
order of reserve jobs, or to cancel printing a reserve job.
2-6
Machine Configuration (continued)
4 RESERVE key
13 DENSITY setting area
: FINISHER MODE icon is displayed when a
5 JOB LIST key
6 Job No. icon
11 SIZE setting area
12 LENS setting area
7 COUNT/SET
indicator
8 Memory indicator
9 SCAN key
10 Paper size/type
indication area