First Startup; Home Page - Delta RPI M30A Operation And Installation Manual

Condition
Standby or Countdown
Power ON
Error or Fault
Night time (No DC)
Bootloader mode
* ON 1s / OFF 1s

5.2 First startup

At first startup, users have to feed in AC power and switch on the Manual
Switch. Inverter will start up on AC power and LCD display panel will come
live. Please set Language and Country according to your region and make
sure that there is no any error, fault or warning showing on home page.
Now you can feed in DC power and wait for inverter initially self-test about
2 minutes. If there is enough power generated from PV array, inverter will
start to feen in power to grid.
First Startup(M30A/ M50A)
Select Language,
► English
Deutsch
Français

5.2.1. Home Page

When inverter is operating normally, the LCD will display the homepage
as shown in Figure 5-3, user can get the information about output power,
inverter status, E-today, date and time.
Pressing any key in home page can users enter the main menu. Press
ESC at main manu or wait 5 minutes without any operation, the display
will return to homepage.
Inverter Status
Output Power
Today Energy
Table 5-1 LED indicator
Select Country,
ENT
► AU/NZ
Austria
EXIT Belgium
Figure 5-2 Country and language settings for first startup
Status:
Power:
E-Today:
Figure 5-3 Home page
Green LED
FLASH *
ON
OFF
OFF
FLASH *
21. Jun 2013 13:50
On Grid
7935
192
41
Turn on PV inverter
Red LED
OFF
OFF
ON
OFF
Are you sure to
ENT
set country :
XXX
EXIT Yes / ►No
Day - Time
W
kWh