Grid Settings - Delta RPI M30A Operation And Installation Manual

5.2.7.4. Grid Settings

Grid settings page includes the voltage and frequency protection points.
These protection points are linked to electricity regulations.
If there is no any special requirement, please do not change any grid settings.
Inverter ID: 002
Insulation
Country
►
Grid Settings
Voltage Protection
►
ENT
Freq. Protection
Reconnect T
P Ramp Up 6000%/m
EXIT
Voltage Protection
EXIT Freq. Protection
►
Reconnect T
P Ramp Up 6000%/m
Figure 5-13 Grid Settings page
High Off
►
ENT
High On
600s High Off T
EXIT Low Off
Low On
►
EXIT
Low Off T
Hi Off Slow
Hi On Slow
Hi Off Sl T
►
EXIT
Lo Off Slow
Lo On Slow
Lo Off Sl T
High Off
►
ENT
High On
600s High Off T
Low Off
EXIT
Low On
►
EXIT
Low Off T
Hi Off Slow
Hi On Slow
Hi Off Slow T
►
EXIT
Lo Off Slow
Lo On Slow
Lo Off Slow T
47
Turn on PV inverter
276.0V
259.0V
0.3s
If user enters wrong settings
184.0V
Wrong Settings
219.0V
0.3s
Press ▲&▼ 5s
276.0V
259.0V
Do you want to set
U to the max range?
600.0s
184.0V
219.0V
1.0s
51.50Hz
50.05Hz
0.1s
If user enters wrong settings
47.50Hz
Wrong Settings
47.55Hz
0.1s
65.00Hz
Press ▲&▼ 5s
64.95Hz
Do you want to set
F to the max range?
5.0s
45.00Hz
45.55Hz
5.0s
Yes / ►No
Yes / ►No