Inverter Information; General Settings - Delta RPI M30A Operation And Installation Manual

Turn on PV inverter

5.2.5. Inverter Information

This page can helps user to recognize the inverter. First section displays
serial number, installation date, ID, and firmware version. Another 3 sections
displays the settings of inverter functions. For more infromation about
these settings, please refer to 5.2.7 Install Settings, 5.2.8 Active/Reactive
power, and 5.2.9 FRT (Fault ride through).

5.2.6. General Settings

Users can set Language, Date and Time, and RS-485 communication
baud rate in this page.
S/N: RN11179CB0
Install: 30/04/2014
DSP 1.80 Red. 1.65
Comm. 1.65 ID: 002
Country:
Germany MV
Insulation:
Baud Rate:
AC connection:
Max. Power:
Dry Cont:
EPO: Normal Close
► Grid Settings
Active Pwr Settings
React Pwr Settings
FRT Settings
Link to settings page but read only
Figure 5-7 Inverter information page
Language
►
Date and Time
Baud Rate
Figure 5-8 General settings page
or
ENT
1200k
19200bps
or
ENT
3P4W
52500W
Insulation
or
ENT
44