First Startup - Delta RPI E5 Operation And Installation Manual

Condition
Countdown or Standalone
Power ON
Error or Fault
AC/DC switch off
Bootloader mode

5.2 First Startup

At first startup, you have to supply AC power and turn on the AC/DC switch.
After a while, LCD display will come live and ask you to set language, country
(electricity regulation), and operation mode.
When all the settings are done, you can see Home Page showing on display.
Now you can supply DC power and wait inverter doing self-test and starting
operation.
In the case of no AC power, you can turn on DC power first then switch on
the AC/DC switch and press the standalone button about 1 second. If DC side
has enough voltage and power, inverter will turn on after a while. In this condition,
inverter is forced operating in standalone mode.
You can also turn on E5 by using battery power. Switch on AC/DC switch and
wake up the battery, waiting about 30 seconds you will see inverter starting
to work in standalone mode. The method of wake up battery will be described
in battery box's manual.
First Startup
Select Language,
English
►
Deutsch
Nederlands
ENT Set Operation Mode,
Self consump.
►
Peak cut
Selling first
ESC
Figure 5-3 : Country and language settings for first startup
Green LED
FLASH
ON
OFF
OFF
Table 5-1 : LED indicator
Select Country,
ENT
AU/NZ
►
Germany LV
NL
ESC
ENT
ESC
33
Turning On the Hybrid Inverter
Red LED
OFF
OFF
ON
OFF
FLASH
Country: Germany LV
Mode: Self-consump.
No Yes