Powering On And Selecting Boot Options In Uefi Boot Mode; Registering The Server - HP HPE ProLiant ML30 Gen9 User Manual

•
Remote deployment installation—To deploy an operating system remotely, use Insight Control
Server Provisioning for an automated solution.
For additional system software and firmware updates, download the Service Pack for ProLiant from the
Hewlett Packard Enterprise website (http://www.hpe.com/servers/spp/download). Software and firmware
must be updated before using the server for the first time, unless any installed software or components
require an older version.
For more information, see "Keeping the system current (on page 87)."
For more information on using these installation methods, see the Hewlett Packard Enterprise website
(http://www.hpe.com/info/ilo).
Powering on and selecting boot options in UEFI
Boot Mode
On servers operating in UEFI Boot Mode, the boot controller and boot order are set automatically.
Press the Power On/Standby button.
1.
During the initial boot:
2.
To modify the server configuration ROM default settings, press the F9 key in the ProLiant POST
o
screen to enter the UEFI System Utilities screen. By default, the System Utilities menus are in the
English language.
If you do not need to modify the server configuration and are ready to install the system software,
o
press the F10 key to access Intelligent Provisioning.
For more information on automatic configuration, see the UEFI documentation on the Hewlett Packard
Enterprise website (http://www.hpe.com/info/enterprise/docs).

Registering the server

To experience quicker service and more efficient support, register the product at the Hewlett Packard
Enterprise Product Registration website (http://www.hpe.com/info/register).
Setup 24